汇编中常见的一些错误信息
ml.exe错误信息:
FATAL严重错误
cannot open file不能打开文件
I/O error closing fileI/O错误 正在关闭文件
I/O error writing fileI/O错误 正在写文件
I/O error reading fileI/O错误 正在读取文件
out of memory缺少内存
aembler limit : macro parameter name table full汇编限制:宏参数名表已满 invalid command-line option无效命令行参数
nesting level too deep嵌套过深
unmatched macro nesting不正确的宏嵌套
line too long行太长
unmatched block nesting不正确的区、段嵌套
directive must be in control block指令必须在控制段
error count exceeds 100; stopping aembly错误数超过100,停止汇编 invalid numerical command-line argument无效命令行参数
too many arguments太多参数、定义、冲突
statement too complex声明太复杂
Internal Aembler Error内部汇编错误
miing source filename找不到源文件名
COFF error writing fileCOFF错误,正在写文件
invalid debug and browser data; file exceeds line limit不能排除故障和浏览数据;文件超过行限制
cannot find link.exe找不到连接程序
cannot find cvpack.exe找不到cvpack.exe
SEVERE严重的错误
memory operand not allowed in context内存操作数无法载入上下文环境 immediate operand not allowed当前操作数无法载入
cannot have more than one ELSE clause per IF blockIF段只能有一个ELSE从句 extra characters after statement附加的字符在声明之后
symbol type conflict符号类型冲突
symbol redefinition符号已经定义
undefined symbol符号没有定义
non-benign record redefinition没有利于记录的定义
syntax error语法错误
syntax error in expreion表达式存在语法错误
invalid type expreion无效的类型表达式
distance invalid for word size of current segment当前区、段的大小命令无效
PROC, MACRO, or macro repeat directive must precede LOCALPROC, MACRO, 或 macro repeat指令必须在LOCAL之前
.MODEL must precede this directive.MODEL必须在指令之前
cannot define as public or external不能定义为公有或外部的
segment attributes cannot change区、段属性不能更换
expreion expected预期表达式
operator expected预期操作数
invalid use of external symbol使用了无效的外部符号
operand must be RECORD type or field操作数必须是RECORD类型或域
identifier not a record没有记录标示符
record constants may not span line breaks连续记录不能超过行间隔
instruction operands must be the same size命令操作数必须是一样的长度
instruction operand must have size命令操作数必须有长度
invalid operand size for instruction操作数长度对于指令无效
operands must be in same segment操作数必须在相同的段
constant expected连续预期
operand must be a memory expreion操作数必须是一个内存表达式
expreion must be a code addre表达式必须是一个代码地址
multiple base registers not allowed不允许多重基础寄存器
multiple index registers not allowed不允许多重标志寄存器
must be index or base register必须是基础或标志寄存器
invalid use of register使用的寄存器无效
invalid INVOKE argument无效的INVOKE符号
must be in segment block必须在区、段、块中
DUP too complexDUP太复杂
too many initial values for structure太多结构的基础资料
statement not allowed inside structure definition声明不允许在结构里面
miing operand for macro operator找不到宏的操作数
line too long
segment register not allowed in context上下文不允许有寄存器
string or text literal too long文本或字符串太长
statement too complex声明太复杂
identifier too long标识符太长
invalid character in file文件里有无效字符
miing angle bracket or brace in literal语句里找不到同样的括弧或框架
miing single or double quotation mark in string找不到单引号或双引号
empty (null) string没有字符串
nondigit in number没有总数
syntax error in floating-point constant不确定的指向中有语法错误
real or BCD number not allowed不允许real或BCD编码
text item required必须的文本项
forced error强制错误
forced error : value equal to 0标准等于零
forced error : value not equal to 0标准不等于零
forced error : symbol not defined符号没有定义
forced error : symbol defined符号已定义
forced error : string blank字符串是空的
forced error : string not blank字符串不是空的
forced error : strings equal字符串是相同的
forced error : strings not equal字符串不是相同的
[ELSE]IF2/.ERR2 not allowed : single-pa aembler[ELSE]IF2/.ERR2不允许单独汇编 expreion too complex for .UNTILCXZ.UNTILCXZ表达式太复杂
can ALIGN only to power of 2仅能对齐到2的幂
structure alignment must be 1, 2, 4, 8, or 16结构对齐必须是1,2,4,8或16 expected预定义
incompatible CPU mode and segment size不匹配的CPU模式和段尺寸
LOCK must be followed by a memory operationLOCK指令必须跟在内存操作之后 instruction prefix not allowed不允许的命令前缀
no operands allowed for this instruction指令没有操作数
invalid instruction operands无效的指令操作数
initializer magnitude too large for specified size初始指定尺寸太大
cannot acce symbol in given segment or group在特定的段或类不能存取符号
operands have different frames操作数存在不同的结构
cannot acce label through segment registers在段寄存器中不能存取标记
jump destination too far跳转目标太远
jump destination must specify a label跳转目标必须指定一个标记
instruction does not allow NEAR indirect addreing指令不允许近间接寻址
instruction does not allow FAR indirect addreing指令不允许远间接寻址
instruction does not allow FAR direct addreing指令不允许远直接寻址
jump distance not poible in current CPU mode跳转距离不适合当前CPU模式
miing operand after unary operator一元运算符之后找不到操作数
cannot mix 16- and 32-bit registers不能结合16位和32位寄存器
invalid scale value无效范围标准
constant value too large连续标准太多
instruction or register not accepted in current CPU mode当前CPU模式不认可的指令或寄存器 reserved word expected预期的保留字
instruction form requires 80386/486指令需要80386/486指示
END directive required at end of fileEND指令必须在文件结尾
too many bits in RECORD太多位在记录里
positive value expected预期的明确的标准
index value past end of string索引标准在字符串结尾之后
count must be positive or zero计数必须是零或明确的
count value too large计数标准太多
operand must be relocatable操作数必须是转移表
constant or relocatable label expected预期的转移表或连续的
segment, group, or segment register expected预期的段,类型或段寄存器 segment expected预期的区段
invalid operand for OFFSETOFFSET操作数无效
invalid use of external absolute由于完全外部的使用无效
segment or group not allowed区段或类型不允许
cannot add two relocatable labels不能增加双重转移表标记
cannot add memory expreion and code label不能增加内存表达式和代码标记